The Best Way to Learn Something New

When learning something new, the quickest easiest most successful way is to find a great coach and mentor. Recommendations are great, or Google the trainer you have in mind especially if the training involves the internet.

If you are learning anything, driving, hobbies, or even setting up a business expert advice to copy is the best way.

You need someone on hand to answer questions, offer training and monitor progress to make sure actions are followed in the right manner. Tutors work in schools, colleges and universities to teach and guide students, apprenticeships work in a similar way. Online language courses are guided with sound tracks to test yourself. Nurses are trained in hospital with supervision from superiors, in virtually all areas of life people are advised by others. Imagine athletes perfecting their style, golfers wanting to improve their swing without a coach. They may be picking up bad habits that are hard to correct in stance or execution. the same applies to most forms of learning, even learning a language, there is usually a voice operated system to copy.

So you need to be sure the coach you have chosen is honest and trustworthy and that they offer training that suits your learning style. Video is good as you can stop and start the video as you attempt to copy the actions. which is probably why YouTube videos have become so popular. However you also need direction to guide you through the learning process

There are currently 2,000,000,000 people daily searching Google for ways to work at home. A growing popularity of the internet, the growth of the relatively new industry and the fact that computers are included in the curriculum for schools. Most families now have laptops and other similar devices.

Franchises have always been popular because of the higher success rate that support gives the venture. The training the supervision and the system to copy. Internet marketing with a good coach and mentor works in a similar way without the extortionate expense of many franchises.

I am very lucky I found a great coach when I set out to develop an online business, it made my learning curve much faster and simpler. I didn’t feel so isolated or overwhelmed. Not only did I have a coach but the comradeship and support of others learning too. Another advantage is regular training and a great range of best-selling products provided for your customers and whilst you are learning the techniques you can earn commissions too. I found it much simpler than attempting to learn it all by my-self, source best-sellers and service my customers, when much of it was done for me.

So if a new venture appeals to you look out for a great coach, take a look at magazine racks for topic ideas and enjoy your new venture.

Make 2017 a year to remember!

 

Posted in Uncategorized | Comments Off on The Best Way to Learn Something New

Autodesk : Top 4 New Features

Autodesk introduced AutoCAD 2017 in March 2016 aiming to help its users stay at the forefront. This latest release lets you work quicker and smarter across connected desktop and mobile solutions, create personalized design experiences, easily team up with colleagues, and stay updated with the latest features and updates. AutoCAD 2017 also includes AutoCAD 360 Pro, a mobile app that allows users use AutoCAD on the go. The latest version addresses several user functionality requests and delivers features that enhance everything from workflows to graphics processing. According to Autodesk, several AutoCAD users globally will be benefitted by several enhancements that have been added in the latest version, such as enhanced 3D printing, new features such as ‘smart centrelines’, share design views on cloud and improvements to PDF handling features.

In the updated features of the 2017 version, PDFs have been added to the supported ‘import file’ formats. As a result, users can import geometry, True Type text and raster images from a PDF file or underlay into the current drawing as AutoCAD objects. Also, the centerlines and center marks get updated accordingly when users move associated objects. Learning content and product updates are seamlessly delivered to help users get the most out of new features with Autodesk Desktop app, an application that substitutes Autodesk Application Manager. Here, users also tend to get the latest security patches and updates for all 2015, 2016, and 2017 versions of Microsoft Windows based Autodesk products. Now, let’s discuss the top 4 new features that Autodesk has included in its AutoCAD 2017 release. Top 4 New Features in Autodesk AutoCAD 2017

Enhanced 3D printing

Utilising the new Autodesk print studio you can create a 3D print ready file and directly print it in nearly all types of 3D printers. This 3D printing tool is offered by spark technologies and is available for 64 bit machines only. To make full use of this tool, you need to go to AutoCAD 3D modelling workspace and select print studio tool from 3D print panel of output tab. If it’s the first time you are using this tool then a prompt will appear from where you can download this tool. After you’ve downloaded and installed, click on print studio again and click on watertight or closed mesh object from your drawing which you want to use for 3D printing.

Smart Centrelines and Centre marks

This new AutoCAD release lets you to easily add centre lines and centre marks to the geometry. Likewise, you need to type the command ‘Centremark’ and click on circular object to create the centre mark, you can use this command to make a centre mark on circle, arc and fillet. Share Design Views on Cloud

Now, you can directly share files with users who don’t even have AutoCAD using A360 cloud account and all they require is a web browser for accessing shared drawing. In order to share a drawing, ensure that you’re logged into your Autodesk 360 cloud and your drawing is saved.

Co-ordination Model

In AutoCAD 2017 coordination model functionality has been improved with support for object snaps. Attach a Navisworks or BIM 360 Glue model to your AutoCAD drawing so you can view it as an underlay. Then just use the standard AutoCAD endpoint and center object snaps to snap to exact locations as you create and edit your design based on the attached models.

Posted in Uncategorized | Comments Off on Autodesk : Top 4 New Features

How Does the Ford GT Stack Up?

How will it compare to the competition?

The GT is by no means a Shelby GT 350 R, not even close. Besides the over $350,000 jump in price and the additional 100 or more horsepower. The new GT is even more track-focused then the previous ones. And the mid-engine layout, combined with the GT’s carbon-fiber construction it much more than a muscle car and more of a Super car.

Even though Ford has not decided on a specific horse power, the new GT with 3.5-liter twin-turbo V6 will produce more than 600 horsepower. Standing up well to the Corvette Z 06 and its’ 650 horses. Now Ford says it is working on the power-to-weight ratios to be the best of any production car. Even if they can’t hit the ratio of the Koenigsegg One with its 2.2 lbs / hp and make it to the range of the McLauren P1 with its 3.5 lbs / hp. Even with its aerodynamics the approx. 3500-lb Corvette Z06 may be a little overweight to held ground with the new GT Priced like a Lamborghini Aventador

Knowing it’s expected price range points to the real competition of the new 2017 GT. Granted the Lamborghini Aventador is packing 691 horse power, but outweighing the Corvette Z06 in curb weight by another 500 pounds, it may have a hard time keeping up with the new GT on the track. When you consider the Aventador holds twice the cylinders as the GT’s twin-turbo V6, and the fact that the Aventador is a naturally aspirated V12 all wheel drive, you can expect it to be faster off the line.

It will be interesting to see how the GT compares to the McLaren 657LT the car that feels like a competition vehicle. Weighing in at less than 3000 lbs, the 657 is pretty light, but the GT will probably weigh less. The Mc Laren 675LT is also a limited-production car, with only 500 units slated to built and cost about $50,000 less than the Lamborghini.

Then there is the Ferrari F12tdf with a price point just under $500,000 with a substantial increase in power. Touting a 6.3-liter V12 with 770 horsepower hitting 0 to 60 in under 3 seconds. The Ferrari will be a head over the GT by more than 100 horsepower, but the based on Fords claims the GT should be much more light weight. With Ford skipping a hybrid-electric system, it will be something to pit the new and severely less expensive Acura NSX with its hybrid tech and all-wheel drive against the new GT and its focus on light weight. With the NSX and its 573 horsepower will it be enough to hold its own against the GT? Time will tell.

Posted in Uncategorized | Comments Off on How Does the Ford GT Stack Up?

Five Former All-Stars Who Need To Have Comeback Years in 2017

St. Louis did to Chicago what the Cubs did to the Cardinals during last year’s off season, signing a valuable part of their outfield to a free agent contract. In 2015 Jason Heyward went from the Cardinals to the Cubs, where he received a World Series ring.

This year, the Cardinals returned the favor, signing Dexter Fowler to a free agent deal. Fowler served as a spark at the lead off spot for the Cubs, as well as providing near Gold Glove defense in center field.

St. Louis hopes the overall season turns out as well as 2016 did for Heyward and the Cubs, who won their first Fall Classic in over one hundred years. In order for that to happen, the Cardinals will have to get better individual results from Fowler than the Cubs did from Heyward. Although he remained a top notch defensive right fielder, Heyward’s offensive numbers were disappointing. He struggled so much that manager Joe Madden did not even start him in several World Series games against the Indians.

The Cubs are hoping Heyward has a comeback season in 2017, as are a dozen or so other players. Several of them were mentioned in an article by David Schoenfield at ESPN.com on December 6,2016, a list including Arizona pitcher Zack Greinke, Boston infielder Pablo Sandoval, and Washington first baseman Ryan Zimmerman.

Omitted from that list are five other players who are hoping to bounce back after a down year, or in some cases, back to back down years. Here are five other prominent players who need to have comeback years in 2017.

Joe Mauer of the Minnesota Twins

The former American League Most Valuable Player has had two sub par years in a row, even though he still leads the Twins in quality at bats. Mauer’s batting averages in 2015 and 2016 were both more than thirty under his career .319 mark.

Bryce Harper of the Washington Nationals

After earning the National League M.V. P. honors the season before, Harper hit just .243 and his 24 home runs were barely half of the total he hit in 2015. The outfielder is also hoping to improve his numbers considerably, since he is eligible for free agency after the season.

Andrew McCutcheon of the Pittsburgh Pirates

Trade talk regarding the former N.L. M.V.P. has been frequent throughout the winter, so his comeback may have to occur while he is wearing the uniform of a club other than the Pirates. Ben Revere of the Washington Nationals

After hitting.317 with the Toronto Blue Jays in 2015, Revere’s average plummeted to .214 when he went to Washington. He really needs a comeback year for, like his teammate Harper, he will become a free agent at the end of the season.

Alex Gordon of the Kansas City Royals

His home run totals went up four from 2015, but his batting average dropped fifty one points to .221. Kansas City, which missed out on the playoffs after winning two straight pennants, needs Gordon to bounce back if they want to return to the postseason.

Posted in Uncategorized | Comments Off on Five Former All-Stars Who Need To Have Comeback Years in 2017

Think Outside the Marketing Box: 10 Quick, New Ideas for 2017

The holidays are upon us again. It’s the time of year for good cheer and some creative marketing ideas to end your year right.

If you’ve been in a marketing slump through the fall, try a few new and interesting ways to get a little more business for your small business:

  1. Create a personalized calendar to gift your clients. You can include inspirational quotes or advice for each month. Staying in front of them will solidify your brand in their minds for years and years to come.
  2. Give your customers a small gift of appreciation, like a customized sticky screen cleaner or promo handout. If you happen to give something that is useful and is well made, your customers won’t just thank you, they will be more interested in giving you referrals to other potential clients. Offer gift cards to give customers more flexibility for gifts. Be sure to place them near your checkout to encourage impulse buys. Starbucks or Amazon gift cards tend to be consistently well received.
  3. Take clients to a more personal lunch or brunch instead of throwing a larger, impersonal holiday party. Focus on having a good time and building rapport through not talking about business. They will take the gesture and thank you by becoming your biggest cheerleader.
  4. Host a day with Santa at your business where you provide free photos with the jolly old man. If your target market has kids, this will be a huge hit.
  5. Give holiday shoppers a free shoulder massage by hiring a masseuse for a few hours.
  6. Partner with other local businesses to give a package of coupons in each shopping bag. This is also a way to encourage sharing business ideas with your neighbors or setting up referral incentives with them.
  7. Sponsor a local event. This time of year many run clubs and other organizations hold holiday runs or New Year’s Day resolution runs or other events. Pick one you enjoy and sponsor it to get your name out. Pair with a local charity. Schedule an event where you and your staff volunteer with the organization. Offer discounts to your customers who volunteer their time with the same organization.
  8. Hold a customer appreciation sale during hours when you are normally closed to show your customers how much you appreciate their loyalty. Create a special invitation and think about giving them door prizes and small gifts for patronizing your business.
Posted in Uncategorized | Comments Off on Think Outside the Marketing Box: 10 Quick, New Ideas for 2017